The learner will identify common threading tools and the procedures for using them.
Taps and Dies
Using the chart, select the answer for the proper tap drill for a ¼-20 NC thread tapping steel.
Question 1 of 10
Taps and Dies
Correct!
Using the chart, select the answer for the proper tap drill for a ¼-20 NC thread tapping steel.
Correct Answer
7/32
Question 1 of 10
Taps and Dies
Incorrect
Using the chart, select the answer for the proper tap drill for a ¼-20 NC thread tapping steel.
Your Answer
Correct Answer
7/32
Question 1 of 10
Taps and Dies
Using the chart, select the answer for the proper tap drill for a 3/4-10 NC thread tapping steel.
Question 1 of 10
Taps and Dies
Correct!
Using the chart, select the answer for the proper tap drill for a 3/4-10 NC thread tapping steel.
Correct Answer
11/16
Question 1 of 10
Taps and Dies
Incorrect
Using the chart, select the answer for the proper tap drill for a 3/4-10 NC thread tapping steel.
Your Answer
Correct Answer
11/16
Question 1 of 10
Taps and Dies
Using the chart, select the answer for the proper tap drill for a 3/8-16 NC thread tapping aluminum.
Question 1 of 10
Taps and Dies
Correct!
Using the chart, select the answer for the proper tap drill for a 3/8-16 NC thread tapping aluminum.
Correct Answer
5/16
Question 1 of 10
Taps and Dies
Incorrect
Using the chart, select the answer for the proper tap drill for a 3/8-16 NC thread tapping aluminum.
Your Answer
Correct Answer
5/16
Question 1 of 10
Taps and Dies
Question 1 of 10
Taps and Dies
Correct!
Correct Answer
square
Question 1 of 10
Taps and Dies
Incorrect
Your Answer
Correct Answer
square
Question 1 of 10
Taps and Dies
On the shank of a tap you will find identifying markings. In the marking 5/8-11 NC G — H3 HS, the G on the tap refers to ______.
Question 1 of 10
Taps and Dies
Correct!
On the shank of a tap you will find identifying markings. In the marking 5/8-11 NC G — H3 HS, the G on the tap refers to ______.
Correct Answer
the tap being a ground tap
Question 1 of 10
Taps and Dies
Incorrect
On the shank of a tap you will find identifying markings. In the marking 5/8-11 NC G — H3 HS, the G on the tap refers to ______.
Your Answer
Correct Answer
the tap being a ground tap
Question 1 of 10
Taps and Dies
On the shank of a tap you will find identifying markings. On the marking 5/8-11 NC G — H3 HS, the H3 refers to ________ .
Question 1 of 10
Taps and Dies
Correct!
On the shank of a tap you will find identifying markings. On the marking 5/8-11 NC G — H3 HS, the H3 refers to ________ .
Correct Answer
the tolerance range for the tap
Question 1 of 10
Taps and Dies
Incorrect
On the shank of a tap you will find identifying markings. On the marking 5/8-11 NC G — H3 HS, the H3 refers to ________ .
Your Answer
Correct Answer
the tolerance range for the tap
Question 1 of 10
Score
You have answered 5 of 10 questions correctly.
50%
Question 1 of 10
No Comments Yet
Taps and Dies by Fox Valley Technical College is licensed under a Creative Commons Attribution 3.0 Unported License.