The learner will identify and select the proper techniques for maintaining surface grinding wheels.

Randomize Questions Randomize Answers

Surface Grinding Wheel Maintenance

Grinding wheel truing is:

the removal of dull abrasive grains
the removal of swarf from the wheel face
done mainly for form grinding
making the cutting edges concentric with the machine spindle

Question 1 of 10

Surface Grinding Wheel Maintenance

Correct!

Grinding wheel truing is:

Correct Answer

making the cutting edges concentric with the machine spindle

Next Question

Question 1 of 10

Surface Grinding Wheel Maintenance

Incorrect

Grinding wheel truing is:

Your Answer

Correct Answer

making the cutting edges concentric with the machine spindle

Next Question

Question 1 of 10

Surface Grinding Wheel Maintenance

The depth of in feed or down feed per pass in truing should be no more than _______ .

0.0001
0.001
0.0005
0.005

Question 1 of 10

Surface Grinding Wheel Maintenance

Correct!

The depth of in feed or down feed per pass in truing should be no more than _______ .

Correct Answer

0.001

Next Question

Question 1 of 10

Surface Grinding Wheel Maintenance

Incorrect

The depth of in feed or down feed per pass in truing should be no more than _______ .

Your Answer

Correct Answer

0.001

Next Question

Question 1 of 10

Surface Grinding Wheel Maintenance

When dressing a wheel for roughing cuts:

use relatively heavier dressing cuts and a fast traverse speed
use relatively heavier dressing cuts and a slow traverse speed
use relatively lighter dressing cuts and a slow traverse speed
use relatively lighter dressing cuts and a fast traverse speed

Question 1 of 10

Surface Grinding Wheel Maintenance

Correct!

When dressing a wheel for roughing cuts:

Correct Answer

use relatively heavier dressing cuts and a fast traverse speed

Next Question

Question 1 of 10

Surface Grinding Wheel Maintenance

Incorrect

When dressing a wheel for roughing cuts:

Your Answer

Correct Answer

use relatively heavier dressing cuts and a fast traverse speed

Next Question

Question 1 of 10

Surface Grinding Wheel Maintenance

Select the name of the type of wheel dresser shown in the illustration.

Brake type dresser
Crush roll type dresser
Cluster type dresser
Single diamond dresser

Question 1 of 10

Surface Grinding Wheel Maintenance

Correct!

Select the name of the type of wheel dresser shown in the illustration.

Correct Answer

Cluster type dresser

Next Question

Question 1 of 10

Surface Grinding Wheel Maintenance

Incorrect

Select the name of the type of wheel dresser shown in the illustration.

Your Answer

Correct Answer

Cluster type dresser

Next Question

Question 1 of 10

Surface Grinding Wheel Maintenance

Wheel balancing that is done on overlapping discs:

is a dynamic form of wheel balancing
is a static form of wheel balancing
must be done with the disc apparatus being perfectly leveled

Question 1 of 10

Surface Grinding Wheel Maintenance

Correct!

Wheel balancing that is done on overlapping discs:

Correct Answer

is a static form of wheel balancing

Next Question

Question 1 of 10

Surface Grinding Wheel Maintenance

Incorrect

Wheel balancing that is done on overlapping discs:

Your Answer

Correct Answer

is a static form of wheel balancing

Next Question

Question 1 of 10

Surface Grinding Wheel Maintenance

The result of using an out of balance grinding wheel is:

fish tails markings appearing on the work piece surface
chatter marks appearing on the work piece surface
damage done to the spindle bearings of the grinder
chatter marks appearing on the work piece surface and damage done to the spindle bearings of the grinder

Question 1 of 10

Surface Grinding Wheel Maintenance

Correct!

The result of using an out of balance grinding wheel is:

Correct Answer

chatter marks appearing on the work piece surface and damage done to the spindle bearings of the grinder

Next Question

Question 1 of 10

Surface Grinding Wheel Maintenance

Incorrect

The result of using an out of balance grinding wheel is:

Your Answer

Correct Answer

chatter marks appearing on the work piece surface and damage done to the spindle bearings of the grinder

Next Question

Question 1 of 10

Surface Grinding Wheel Maintenance

When truing a grinding wheel, it is important:

to find the lowest point (closest to the spindle) of the wheel
to find the highest point (closest to the dresser) of the wheel
to find a point somewhere in the middle
it doesn't matter where you start truing a wheel

Question 1 of 10

Surface Grinding Wheel Maintenance

Correct!

When truing a grinding wheel, it is important:

Correct Answer

to find the highest point (closest to the dresser) of the wheel

Next Question

Question 1 of 10

Surface Grinding Wheel Maintenance

Incorrect

When truing a grinding wheel, it is important:

Your Answer

Correct Answer

to find the highest point (closest to the dresser) of the wheel

Next Question

Question 1 of 10

Surface Grinding Wheel Maintenance

In the illustration below, the wheel dresser position:

is too close to the vertical centerline of the wheel
is on the wrong side of the vertical centerline of the wheel
is pointing in the wrong direction
is correct

Question 1 of 10

Surface Grinding Wheel Maintenance

Correct!

In the illustration below, the wheel dresser position:

Correct Answer

is pointing in the wrong direction

Next Question

Question 1 of 10

Surface Grinding Wheel Maintenance

Incorrect

In the illustration below, the wheel dresser position:

Your Answer

Correct Answer

is pointing in the wrong direction

Next Question

Question 1 of 10

Surface Grinding Wheel Maintenance

In the illustration below, the wheel dresser position:

is too close to the vertical centerline of the wheel
is on the wrong side of the vertical centerline of the wheel
is pointing in the wrong direction
is correct

Question 1 of 10

Surface Grinding Wheel Maintenance

Correct!

In the illustration below, the wheel dresser position:

Correct Answer

is correct

Next Question

Question 1 of 10

Surface Grinding Wheel Maintenance

Incorrect

In the illustration below, the wheel dresser position:

Your Answer

Correct Answer

is correct

Next Question

Question 1 of 10

Surface Grinding Wheel Maintenance

True or False: A small amount of coolant should be used when truing or dressing a wheel with a diamond dresser.

True
False

Question 1 of 10

Surface Grinding Wheel Maintenance

Correct!

True or False: A small amount of coolant should be used when truing or dressing a wheel with a diamond dresser.

Correct Answer

False

Explanation:

If you can't flood the diamond dresser with coolant, don't use any coolant.

Finish

Question 1 of 10

Surface Grinding Wheel Maintenance

Incorrect

True or False: A small amount of coolant should be used when truing or dressing a wheel with a diamond dresser.

Your Answer

Correct Answer

False

Explanation:

If you can't flood the diamond dresser with coolant, don't use any coolant.

Finish

Question 1 of 10

Surface Grinding Wheel Maintenance

Score

You have answered 5 of 10 questions correctly.

50%

Start Over

See other flashcards and apps related to:

grinding
grinding wheels
machine tool
maintenance
surface
techniques
wheel

Question 1 of 10

Author

Kelly Curran

Published: 4/2/2015

Last Updated: 4/2/2015

Tags

grinding
grinding wheels
machine tool
maintenance
surface
techniques
wheel

Download as Word Document Download SCORM Package

No Comments Yet

Add Comment

Note: Comments must be approved before they are visible.

First Name

Last Name

Email Address

Comment

Surface Grinding Wheel Maintenance by Fox Valley Technical College is licensed under a Creative Commons Attribution 3.0 Unported License.