The learner will demonstrate an understanding of equipment used in GMAW by identifying parts and their intended purposes.
Which drive roll is used for welding with aluminum electrode wire?
Which drive roll is used for welding with aluminum electrode wire?
U-Groove rolls
Which drive roll is used for welding with aluminum electrode wire?
U-Groove rolls
Increasing the inductance does what to the short circuit arc?
Increasing the inductance does what to the short circuit arc?
Impedes the "pinch effect" of the short-circuited electrode
Increasing the inductance does what to the short circuit arc?
Impedes the "pinch effect" of the short-circuited electrode
What effect does tapping into the slope of a welding power source and changing it have?
What effect does tapping into the slope of a welding power source and changing it have?
Changes the relationship of the volt/amp curve
What effect does tapping into the slope of a welding power source and changing it have?
Changes the relationship of the volt/amp curve
Increased arc on time through inductance makes the puddle more fluid and results in a ____________ weld bead.
Increased arc on time through inductance makes the puddle more fluid and results in a ____________ weld bead.
flatter and smoother
Increased arc on time through inductance makes the puddle more fluid and results in a ____________ weld bead.
flatter and smoother
The type of welding power source you use in the lab and are also most likely to use in industry is ___________.
The type of welding power source you use in the lab and are also most likely to use in industry is ___________.
3-Phase 460V
The type of welding power source you use in the lab and are also most likely to use in industry is ___________.
3-Phase 460V
The smallest type of welding power source for the amperage it puts out is _____________.
The smallest type of welding power source for the amperage it puts out is _____________.
inverters (static subcategory)
The smallest type of welding power source for the amperage it puts out is _____________.
inverters (static subcategory)
The shielding gas flow is set with a device that has a little steel ball floating at the set gas pressure. This device is called a ________________.
The shielding gas flow is set with a device that has a little steel ball floating at the set gas pressure. This device is called a ________________.
flow meter
The shielding gas flow is set with a device that has a little steel ball floating at the set gas pressure. This device is called a ________________.
flow meter
What measurement is used when setting the shielding gas flow?
What measurement is used when setting the shielding gas flow?
CFH (cubic feet per hour)
What measurement is used when setting the shielding gas flow?
CFH (cubic feet per hour)