Learners take a close look at the Edison Wire System and observe how the current values through the two lines and the neutral of the system change as the loads vary.

Learners read a description of torque and study the factors that cause its magnitude to change.

In this animated activity, learners examine how cavitation occurs in a hydraulic pump. A video clip is included. Learners then test their knowledge in a brief quiz.

In this animated object, learners examine how aeration develops in a hydraulic pump. A brief quiz completes the activity.

In this simulation activity, an electrician will troubleshoot an AC motor that is overheating. Before accessing blueprints and then using a multimeter to find the fault, the learner will follow safety protocols by following lock-out tag-out procedures and then suit up with appropriate (PPE) personal protection equipment.

In this simulation activity, an electrician troubleshoots a defective compressor motor that will not start. To find the problem, the learner selects the appropriate blueprints that must be referred to while performing the troubleshooting steps. Then safety protocols will be followed, such as making lockout-tag out installations and donning PPE items before taking measurements with a multimeter to locate the faulty component.

In this simulation activity, an electrician troubleshoots a defective water pump that will not start. To find the problem, the learner selects the appropriate blueprints that must be referred to while performing the troubleshooting steps. Then safety protocols will be followed, such as making lockout-tag out installations and donning PPE items before taking measurements with a multimeter to locate the faulty component.

In this learning activity you'll create a packet filter.

In this learning activity you'll examine how a large computer network is configured.

Match the causes to the effects

memory match

Terminology used in Green Engineering

Ulangkaji 6 sifat bahan