The learner will calculate tolerance and percent tolerance in measurement numbers.
Tolerance and Percent Tolerance
On a technical drawing, the length of a part is given as 1.58 ± 0.002 inches. What is the percent tolerance to the nearest hundredth of a percent?
Question 1 of 10
Tolerance and Percent Tolerance
Correct!
On a technical drawing, the length of a part is given as 1.58 ± 0.002 inches. What is the percent tolerance to the nearest hundredth of a percent?
Correct Answer
± 0.13%
Question 1 of 10
Tolerance and Percent Tolerance
Incorrect
On a technical drawing, the length of a part is given as 1.58 ± 0.002 inches. What is the percent tolerance to the nearest hundredth of a percent?
Your Answer
Correct Answer
± 0.13%
Question 1 of 10
Tolerance and Percent Tolerance
A length is measured to be 0.647 inches with a tolerance of ±0.004 inches. What is the percent tolerance to the nearest hundredth of a percent?
Question 1 of 10
Tolerance and Percent Tolerance
Correct!
A length is measured to be 0.647 inches with a tolerance of ±0.004 inches. What is the percent tolerance to the nearest hundredth of a percent?
Correct Answer
± 0.62%
Question 1 of 10
Tolerance and Percent Tolerance
Incorrect
A length is measured to be 0.647 inches with a tolerance of ±0.004 inches. What is the percent tolerance to the nearest hundredth of a percent?
Your Answer
Correct Answer
± 0.62%
Question 1 of 10
Tolerance and Percent Tolerance
A length is measured to be 167.00 mm with a tolerance of ±0.50 mm. What is the percent tolerance to the nearest hundredth of a percent?
Question 1 of 10
Tolerance and Percent Tolerance
Correct!
A length is measured to be 167.00 mm with a tolerance of ±0.50 mm. What is the percent tolerance to the nearest hundredth of a percent?
Correct Answer
± 0.30%
Question 1 of 10
Tolerance and Percent Tolerance
Incorrect
A length is measured to be 167.00 mm with a tolerance of ±0.50 mm. What is the percent tolerance to the nearest hundredth of a percent?
Your Answer
Correct Answer
± 0.30%
Question 1 of 10
Tolerance and Percent Tolerance
On a technical drawing, the length of a part is given as 33.48 ± 0.07 mm. What is the percent tolerance to the nearest hundredth of a percent?
Question 1 of 10
Tolerance and Percent Tolerance
Correct!
On a technical drawing, the length of a part is given as 33.48 ± 0.07 mm. What is the percent tolerance to the nearest hundredth of a percent?
Correct Answer
± 0.21%
Question 1 of 10
Tolerance and Percent Tolerance
Incorrect
On a technical drawing, the length of a part is given as 33.48 ± 0.07 mm. What is the percent tolerance to the nearest hundredth of a percent?
Your Answer
Correct Answer
± 0.21%
Question 1 of 10
Tolerance and Percent Tolerance
A length is measured to be 1.79 inches with a percent tolerance of ±0.15%. What is the tolerance to the nearest thousandth of an inch?
Question 1 of 10
Tolerance and Percent Tolerance
Correct!
A length is measured to be 1.79 inches with a percent tolerance of ±0.15%. What is the tolerance to the nearest thousandth of an inch?
Correct Answer
± 0.003 in.
Question 1 of 10
Tolerance and Percent Tolerance
Incorrect
A length is measured to be 1.79 inches with a percent tolerance of ±0.15%. What is the tolerance to the nearest thousandth of an inch?
Your Answer
Correct Answer
± 0.003 in.
Question 1 of 10
Tolerance and Percent Tolerance
A length is measured to be 0.792 inches with a percent tolerance of ±0.20%. What is the tolerance to the nearest thousandth of an inch?
Question 1 of 10
Tolerance and Percent Tolerance
Correct!
A length is measured to be 0.792 inches with a percent tolerance of ±0.20%. What is the tolerance to the nearest thousandth of an inch?
Correct Answer
± 0.002 in.
Question 1 of 10
Tolerance and Percent Tolerance
Incorrect
A length is measured to be 0.792 inches with a percent tolerance of ±0.20%. What is the tolerance to the nearest thousandth of an inch?
Your Answer
Correct Answer
± 0.002 in.
Question 1 of 10
Tolerance and Percent Tolerance
A length is measured to be 212 mm with a percent tolerance of ±0.05%. What is the tolerance to the nearest hundredth of a millimeter?
Question 1 of 10
Tolerance and Percent Tolerance
Correct!
A length is measured to be 212 mm with a percent tolerance of ±0.05%. What is the tolerance to the nearest hundredth of a millimeter?
Correct Answer
± 0.11 mm
Question 1 of 10
Tolerance and Percent Tolerance
Incorrect
A length is measured to be 212 mm with a percent tolerance of ±0.05%. What is the tolerance to the nearest hundredth of a millimeter?
Your Answer
Correct Answer
± 0.11 mm
Question 1 of 10
Tolerance and Percent Tolerance
A length is measured to be 52.60 mm with a percent tolerance of ±0.10%. What is the tolerance to the nearest hundredth of a millimeter?
Question 1 of 10
Tolerance and Percent Tolerance
Correct!
A length is measured to be 52.60 mm with a percent tolerance of ±0.10%. What is the tolerance to the nearest hundredth of a millimeter?
Correct Answer
± 0.05 mm
Question 1 of 10
Tolerance and Percent Tolerance
Incorrect
A length is measured to be 52.60 mm with a percent tolerance of ±0.10%. What is the tolerance to the nearest hundredth of a millimeter?
Your Answer
Correct Answer
± 0.05 mm
Question 1 of 10
Tolerance and Percent Tolerance
Specifications call for a hole in a machined part to have a diameter of 2.875 ± 0.005 inches. The hole in the machined part is later measured to be 2.871 inches. Does the machinist's error lie within the specified tolerance?
Question 1 of 10
Tolerance and Percent Tolerance
Correct!
Specifications call for a hole in a machined part to have a diameter of 2.875 ± 0.005 inches. The hole in the machined part is later measured to be 2.871 inches. Does the machinist's error lie within the specified tolerance?
Correct Answer
Yes
Question 1 of 10
Tolerance and Percent Tolerance
Incorrect
Specifications call for a hole in a machined part to have a diameter of 2.875 ± 0.005 inches. The hole in the machined part is later measured to be 2.871 inches. Does the machinist's error lie within the specified tolerance?
Your Answer
Correct Answer
Yes
Question 1 of 10
Tolerance and Percent Tolerance
Specifications call for a machined part to be 148.25 mm in length with a tolerance of ±0.22 mm. The length of the machined part is later measured to be 148.49 mm. Does the machinist's error lie within the specified tolerance?
Question 1 of 10
Tolerance and Percent Tolerance
Correct!
Specifications call for a machined part to be 148.25 mm in length with a tolerance of ±0.22 mm. The length of the machined part is later measured to be 148.49 mm. Does the machinist's error lie within the specified tolerance?
Correct Answer
No
Question 1 of 10
Tolerance and Percent Tolerance
Incorrect
Specifications call for a machined part to be 148.25 mm in length with a tolerance of ±0.22 mm. The length of the machined part is later measured to be 148.49 mm. Does the machinist's error lie within the specified tolerance?
Your Answer
Correct Answer
No
Question 1 of 10
Tolerance and Percent Tolerance
Specifications call for a notch in a machined part to be 0.725 inches in length with a percent tolerance of ±0.15%. The notch in the machined part is later measured to be 0.727 inches. Does the machinist's error lie within the specified percent tolerance?
Question 1 of 10
Tolerance and Percent Tolerance
Correct!
Specifications call for a notch in a machined part to be 0.725 inches in length with a percent tolerance of ±0.15%. The notch in the machined part is later measured to be 0.727 inches. Does the machinist's error lie within the specified percent tolerance?
Correct Answer
No
Question 1 of 10
Tolerance and Percent Tolerance
Incorrect
Specifications call for a notch in a machined part to be 0.725 inches in length with a percent tolerance of ±0.15%. The notch in the machined part is later measured to be 0.727 inches. Does the machinist's error lie within the specified percent tolerance?
Your Answer
Correct Answer
No
Question 1 of 10
Tolerance and Percent Tolerance
Question 1 of 10
Tolerance and Percent Tolerance
Correct!
Correct Answer
Yes
Question 1 of 10
Tolerance and Percent Tolerance
Incorrect
Your Answer
Correct Answer
Yes
Question 1 of 10
Score
You have answered 5 of 10 questions correctly.
50%
See other flashcards and apps related to:
Question 1 of 10
- Author
- Published
- 3/31/2014
- Last Updated
- 3/31/2014
No Comments Yet
Tolerance and Percent Tolerance by Fox Valley Technical College is licensed under a Creative Commons Attribution 3.0 Unported License.