In this learning activity the student will identify and select the proper type of work-holding and procedures for particular applications.
Work-Holding Devices
Question 1 of 10
Work-Holding Devices
Question 1 of 10
Work-Holding Devices
Incorrect
Identify the work-holding device shown.
Your Answer
Correct Answer
Swivel Base
Question 1 of 10
Work-Holding Devices
Determine whether the work-holding method in the illustration is correct or incorrect.
Question 1 of 10
Work-Holding Devices
Correct!
Determine whether the work-holding method in the illustration is correct or incorrect.
Correct Answer
Incorrect
Clamps need to be flat on the workpiece.
Question 1 of 10
Work-Holding Devices
Incorrect
Determine whether the work-holding method in the illustration is correct or incorrect.
Your Answer
Correct Answer
Incorrect
Clamps need to be flat on the workpiece.
Question 1 of 10
Work-Holding Devices
Question 1 of 10
Work-Holding Devices
Question 1 of 10
Work-Holding Devices
Incorrect
Identify the work-holding device shown.
Your Answer
Correct Answer
Milling Fixture
Question 1 of 10
Work-Holding Devices
Determine whether the work-holding method in the illustration is correct or incorrect.
Question 1 of 10
Work-Holding Devices
Correct!
Determine whether the work-holding method in the illustration is correct or incorrect.
Correct Answer
Incorrect
Clamp stud needs to be located as close to the workpiece as possible.
Question 1 of 10
Work-Holding Devices
Incorrect
Determine whether the work-holding method in the illustration is correct or incorrect.
Your Answer
Correct Answer
Incorrect
Clamp stud needs to be located as close to the workpiece as possible.
Question 1 of 10
Work-Holding Devices
Question 1 of 10
Work-Holding Devices
Correct!
Determine whether the work-holding method shown is correct or incorrect.
Correct Answer
Correct
Question 1 of 10
Work-Holding Devices
Incorrect
Determine whether the work-holding method shown is correct or incorrect.
Your Answer
Correct Answer
Correct
Question 1 of 10
Work-Holding Devices
Determine whether the work-holding method in the illustration is correct or incorrect.
Question 1 of 10
Work-Holding Devices
Correct!
Determine whether the work-holding method in the illustration is correct or incorrect.
Correct Answer
Incorrect
Clamps need to be placed directly over the parallels or step blocks.
Question 1 of 10
Work-Holding Devices
Incorrect
Determine whether the work-holding method in the illustration is correct or incorrect.
Your Answer
Correct Answer
Incorrect
Clamps need to be placed directly over the parallels or step blocks.
Question 1 of 10
Work-Holding Devices
Identify the work-holding device shown.
Question 1 of 10
Work-Holding Devices
Question 1 of 10
Work-Holding Devices
Question 1 of 10
Work-Holding Devices
Determine whether the work-holding method in the illustration is correct or incorrect.
Question 1 of 10
Work-Holding Devices
Correct!
Determine whether the work-holding method in the illustration is correct or incorrect.
Correct Answer
Correct
Question 1 of 10
Work-Holding Devices
Incorrect
Determine whether the work-holding method in the illustration is correct or incorrect.
Your Answer
Correct Answer
Correct
Question 1 of 10
Work-Holding Devices
Question 1 of 10
Work-Holding Devices
Question 1 of 10
Work-Holding Devices
Incorrect
Identify the work-holding device shown.
Your Answer
Correct Answer
Angle Plates
Question 1 of 10
Work-Holding Devices
Question 1 of 10
Work-Holding Devices
Question 1 of 10
Work-Holding Devices
Incorrect
Identify the work-holding device shown.
Your Answer
Correct Answer
Strap Clamp
Question 1 of 10
Work-Holding Devices
Determine whether the work-holding method in the illustration is correct or incorrect.
Question 1 of 10
Work-Holding Devices
Correct!
Determine whether the work-holding method in the illustration is correct or incorrect.
Correct Answer
Incorrect
Clamp stud needs to be located as close to the workpiece as possible.
Question 1 of 10
Work-Holding Devices
Incorrect
Determine whether the work-holding method in the illustration is correct or incorrect.
Your Answer
Correct Answer
Incorrect
Clamp stud needs to be located as close to the workpiece as possible.
Question 1 of 10
Work-Holding Devices
Question 1 of 10
Work-Holding Devices
Correct!
Determine whether the work-holding method shown is correct or incorrect.
Correct Answer
Incorrect
Vise pressure needs to be equalized with a spacer when the part is set off center.
Question 1 of 10
Work-Holding Devices
Incorrect
Determine whether the work-holding method shown is correct or incorrect.
Your Answer
Correct Answer
Incorrect
Vise pressure needs to be equalized with a spacer when the part is set off center.
Question 1 of 10
Work-Holding Devices
Question 1 of 10
Work-Holding Devices
Correct!
Determine whether the work-holding method shown is correct or incorrect.
Correct Answer
Correct
Question 1 of 10
Work-Holding Devices
Incorrect
Determine whether the work-holding method shown is correct or incorrect.
Your Answer
Correct Answer
Correct
Question 1 of 10
Work-Holding Devices
Question 1 of 10
Work-Holding Devices
Question 1 of 10
Work-Holding Devices
Incorrect
Identify the work-positioning device shown.
Your Answer
Correct Answer
Parallels
Question 1 of 10
Work-Holding Devices
Question 1 of 10
Work-Holding Devices
Correct!
Determine whether the work-holding method shown is correct or incorrect.
Correct Answer
Correct
Question 1 of 10
Work-Holding Devices
Incorrect
Determine whether the work-holding method shown is correct or incorrect.
Your Answer
Correct Answer
Correct
Question 1 of 10
Work-Holding Devices
Score
You have answered 5 of 10 questions correctly.
50%
See other flashcards and apps related to:
Question 1 of 10
- Author
- Published
- 4/2/2015
- Last Updated
- 4/2/2015
- Tags
No Comments Yet
Work-Holding Devices by Fox Valley Technical College is licensed under a Creative Commons Attribution 3.0 Unported License.