The learner will identify proper and improper operating conditions when using carbide cutting tools.
Using Carbide Cutting Tools
Question 1 of 10
Using Carbide Cutting Tools
Correct!
Correct Answer
grade
Question 1 of 10
Using Carbide Cutting Tools
Incorrect
Your Answer
Correct Answer
grade
Question 1 of 10
Using Carbide Cutting Tools
Question 1 of 10
Using Carbide Cutting Tools
Correct!
Correct Answer
all of the above
Question 1 of 10
Using Carbide Cutting Tools
Incorrect
Your Answer
Correct Answer
all of the above
Question 1 of 10
Using Carbide Cutting Tools
True or False: With all other things being equal, a smaller nose radius will give you a better surface finish.
Question 1 of 10
Using Carbide Cutting Tools
Correct!
True or False: With all other things being equal, a smaller nose radius will give you a better surface finish.
Correct Answer
False
Question 1 of 10
Using Carbide Cutting Tools
Incorrect
True or False: With all other things being equal, a smaller nose radius will give you a better surface finish.
Your Answer
Correct Answer
False
Question 1 of 10
Using Carbide Cutting Tools
The most common type of hardness rating as it affects machinability is _______.
Question 1 of 10
Using Carbide Cutting Tools
Correct!
The most common type of hardness rating as it affects machinability is _______.
Correct Answer
Brinell
Question 1 of 10
Using Carbide Cutting Tools
Incorrect
The most common type of hardness rating as it affects machinability is _______.
Your Answer
Correct Answer
Brinell
Question 1 of 10
Using Carbide Cutting Tools
Question 1 of 10
Using Carbide Cutting Tools
Correct!
Correct Answer
both increase the feed and reduce the speed
Question 1 of 10
Using Carbide Cutting Tools
Incorrect
Your Answer
Correct Answer
both increase the feed and reduce the speed
Question 1 of 10
Using Carbide Cutting Tools
When trying to improve the productivity of a turning operation the ________ is the second most likely cutting parameter to adjust.
Question 1 of 10
Using Carbide Cutting Tools
Correct!
When trying to improve the productivity of a turning operation the ________ is the second most likely cutting parameter to adjust.
Correct Answer
feed rate
Question 1 of 10
Using Carbide Cutting Tools
Incorrect
When trying to improve the productivity of a turning operation the ________ is the second most likely cutting parameter to adjust.
Your Answer
Correct Answer
feed rate
Question 1 of 10
Using Carbide Cutting Tools
Question 1 of 10
Using Carbide Cutting Tools
Correct!
True or False: As the hardness BHN number increases the cutting speed decreases.
Correct Answer
True
Question 1 of 10
Using Carbide Cutting Tools
Incorrect
True or False: As the hardness BHN number increases the cutting speed decreases.
Your Answer
Correct Answer
True
Question 1 of 10
Using Carbide Cutting Tools
When trying to improve the productivity of a turning operation the _______ is the easiest cutting parameter to adjust.
Question 1 of 10
Using Carbide Cutting Tools
Correct!
When trying to improve the productivity of a turning operation the _______ is the easiest cutting parameter to adjust.
Correct Answer
depth of cut
Question 1 of 10
Using Carbide Cutting Tools
Incorrect
When trying to improve the productivity of a turning operation the _______ is the easiest cutting parameter to adjust.
Your Answer
Correct Answer
depth of cut
Question 1 of 10
Using Carbide Cutting Tools
In finishing operations the feed rate is established primarily:
Question 1 of 10
Using Carbide Cutting Tools
Correct!
In finishing operations the feed rate is established primarily:
Correct Answer
to acquire the proper surface finish
Question 1 of 10
Using Carbide Cutting Tools
Incorrect
In finishing operations the feed rate is established primarily:
Your Answer
Correct Answer
to acquire the proper surface finish
Question 1 of 10
Using Carbide Cutting Tools
If you experience built of edge on the cutting tool, the appropriate action would be:
Question 1 of 10
Using Carbide Cutting Tools
Correct!
If you experience built of edge on the cutting tool, the appropriate action would be:
Correct Answer
increase the cutting speed
Question 1 of 10
Using Carbide Cutting Tools
Incorrect
If you experience built of edge on the cutting tool, the appropriate action would be:
Your Answer
Correct Answer
increase the cutting speed
Question 1 of 10
Score
You have answered 5 of 10 questions correctly.
50%
See other flashcards and apps related to:
Question 1 of 10
- Author
- Published
- 4/2/2015
- Last Updated
- 4/2/2015
No Comments Yet
Using Carbide Cutting Tools by Fox Valley Technical College is licensed under a Creative Commons Attribution 3.0 Unported License.