The learner will identify cutting tool materials and compare the machinability of materials.
Carbide and Other Cutting Tool Materials - Set 1
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Correct!
Tungsten carbide (cemented carbide) is considered to be a composite material.
Correct Answer
True
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Incorrect
Tungsten carbide (cemented carbide) is considered to be a composite material.
Your Answer
Correct Answer
True
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Correct!
Correct Answer
True
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Incorrect
Your Answer
Correct Answer
True
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Correct!
Machinability factors are only limited to the type of material being machined.
Correct Answer
False
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Incorrect
Machinability factors are only limited to the type of material being machined.
Your Answer
Correct Answer
False
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Tool life is affected by which of the following?
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Correct!
Tool life is affected by which of the following?
Correct Answer
All of the above
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Incorrect
Tool life is affected by which of the following?
Your Answer
Correct Answer
All of the above
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Hard carbide and cobalt were sintered together to produce man-made:
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Correct!
Hard carbide and cobalt were sintered together to produce man-made:
Correct Answer
Diamonds
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Incorrect
Hard carbide and cobalt were sintered together to produce man-made:
Your Answer
Correct Answer
Diamonds
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Correct!
Correct Answer
False
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Incorrect
Your Answer
Correct Answer
False
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
The average tool edge life expectancy of a coated carbide insert is approximately_______ in the cut.
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Correct!
The average tool edge life expectancy of a coated carbide insert is approximately_______ in the cut.
Correct Answer
18 to 20 minutes
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Incorrect
The average tool edge life expectancy of a coated carbide insert is approximately_______ in the cut.
Your Answer
Correct Answer
18 to 20 minutes
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Which tooling setup option is the least accurate, or rigid, method of tool holding?
-
Clamping an end mill in a solid holder with the set screw clamped to the set screw flat on the tool shank
-
Clamping an end mill in a hydraulic or a shrink fit holder
-
Clamping an end mill in a solid holder with the set screw on the shank diameter of the tool
-
Clamping an end mill in a spring collet holder
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Correct!
Which tooling setup option is the least accurate, or rigid, method of tool holding?
Correct Answer
Clamping an end mill in a spring collet holder
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Incorrect
Which tooling setup option is the least accurate, or rigid, method of tool holding?
Your Answer
Correct Answer
Clamping an end mill in a spring collet holder
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
A material that is considered to be 100% machinable is:
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Incorrect
A material that is considered to be 100% machinable is:
Your Answer
Correct Answer
B1112
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Other binder materials were tested and used to help with the resistance of:
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Correct!
Other binder materials were tested and used to help with the resistance of:
Correct Answer
Cratering
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Incorrect
Other binder materials were tested and used to help with the resistance of:
Your Answer
Correct Answer
Cratering
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Which tooling setup is the second-most accurate and rigid method of tool holding?
-
Clamping an end mill in a solid holder with the set screw clamped to the set screw flat on the tool shank
-
Clamping an end mill in a hydraulic or shrink fit holder
-
Clamping an end mill in a spring collet holder
-
Clamping an end mill in a solid holder with the set screw on the shank diameter of the tool
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Correct!
Which tooling setup is the second-most accurate and rigid method of tool holding?
Correct Answer
Clamping an end mill in a solid holder with the set screw clamped to the set screw flat on the tool shank
Question 1 of 10
Carbide and Other Cutting Tool Materials - Set 1
Incorrect
Which tooling setup is the second-most accurate and rigid method of tool holding?
Your Answer
Correct Answer
Clamping an end mill in a solid holder with the set screw clamped to the set screw flat on the tool shank
Question 1 of 10
Score
You have answered 5 of 10 questions correctly.
50%
Question 1 of 10
No Comments Yet
Carbide and Other Cutting Tool Materials - Set 1 by Fox Valley Technical College is licensed under a Creative Commons Attribution 3.0 Unported License.