Radial Drilling Project - Angle Plate Part 2a |
|
Part Description: Angle Plate 2a Quantity Req.: 1 |
|
Name _______________________ | Date: _____________ |
PLEASE HAVE YOUR INSTRUCTOR INITIAL AND DATE THE GREY BOXES (*) AFTER THE REQUIRED
OPERATIONS.
Click here to view the part
specification.
Step# | Location | Description | Initials | Date |
10 | Instructor | Obtain stock. | * | |
20 | Bench | Deburr. | ||
30 | Bench | Cap screw the 2 plates (Plate 1 and Plate 2) together forming an "L" shape 4" x 4". | ||
40 | Layout Table | Layout the drilled and reamed hole locations. | ||
50 | Bench | Center punch the hole locations | ||
60 | Radial Arm Drill Press | Center drill the punched locations. | ||
70 | Radial Arm Drill Press | Drill "D" drill to proper depth through two plates. | ||
80 | Radial Arm Drill Press | Chamfer the top plate in two places. | ||
90 | Radial Arm Drill Press | Set up to ream. | ||
100 | Radial Arm Drill Press | Have the instructor check setup. | * | |
105 | Radial Arm Drill Press | Ream .2495 reamer to the program depth through both plates. | ||
110 | Bench | Unscrew the two plates. | ||
120 | Radial Arm Drill Press | Chamfer the reamed holes on both plates. | ||
130 | Bench | Deburr and clean off the dye. | ||
140 | Bench | Inspect the part and turn it in for grading. | * |