Demultiplexers (Screencast)
By Terry Bartelt
In this animated object, learners examine the operation of a demultiplexer along with the data output and select lines. A brief quiz completes the activity.
Steel Rules Types and Usage
By Kelly Curran
In this learning activity you'll review steel rule measurement.
Lathes: Turning Stainless Steel
This document is a visual and text description of turning stainless steel on a lathe.
Chordal Distances
By Barbara Anderegg
Students review how to use chordal distances to locate bolt hole circle locations. They then take a 10-question quiz to test their knowledge.
Lathe Project: Top Handle Body
This project gives a drawing with steps to complete the activity.
Grinding Wheel Markings
In this learning object you'll explore wheel markings identifying the major factors in grinding wheel selection.
Print Reading: Holder
Learners test their ability to visualize a holder in this interactive exercise that features animated pictorial views.
Drill Press Work Holding Devices
In this document you'll review drill press work-holding devices.
Shear - Hydraulic - Adira - Operator's Panel
By Dave Hoffman
Picture of Adira hydraulic shear's operator's panel with part identification and instructions on how to start and stop the shear as well as setting stroke (cutting length).
Layout Project: Drill & Tap Gage
In this learning object you'll review the steps to complete the layout of a part.
Project Sheet - Web Thinning
Logic Probe Troubleshooting
In this animated object, learners follow a process for troubleshooting digital integrated circuits on a printed circuit board using a logic probe.
Saw - Marvel - PCII - Manual Programming
In this learning activity you'll review step-by-step instructions for the Marvel PCII using manual programming.
Clock Pulse Triggering of Flip-Flops (Screencast)
This screencast shows the symbols used to represent the type of pulse required at the clock input to activate flip-flops.
Lathes: Tapers & Radii
This document is a visual and text description of tapers and radii on a lathe.
Questions Associated with Steel Rules
In this learning object you'll explore some frequently asked questions concerning steel rule usage.
Screw Threads and Fasteners Review
This review assesses the student's ability to understand screw threads and fasteners.
Thread Cutting on a Drill Press
In this document you'll review thread cutting using a drill press.
Sizing an Automatic Car Wash Interceptor
By Randy Lorge
Learners follow steps for sizing a car wash interceptor according to the Wisconsin Administrative Plumbing Code. A quiz completes the activity. (Hover your mouse in lower right corner to see the next button)
Multivibrators
In this animated object, learners examine three different types of multivibrators: astable, monostable, and bistable. A brief quiz completes the activity.
Development of a Boolean Expression for a Combinational Logic Circuit
By Patrick Hoppe
Learners view an animated demonstration of how to determine the final output of the combinational circuit.
Identifying Non-Random Patterns on a Control Chart
By Mary Lee Rudnick-Kaun
In this learning activity you'll recognize several patterns on an Xbar and R control chart. These non-random patterns are indications that the process is not in a state of statistical control.
Lathe Turning Machine Types
In this learning activity you'll explore Lathe Turning Machines.
Programming the Hurco Controller - "CNC"
In this learning object you'll become familiar with the Hurco Controller in full CNC mode.
Cylindrical Grinder Components
In this learning object you'll review the components of a Brown & Sharpe Universal Cylindrical Grinder.