Milling Machine Inspection
By Excelsior College
In this simulation activity, the lubrication fluid in a milling machine is tested, the condition of its 24 drill bits are inspected and identified before replacing those that are defective.
Micrometer Adjustment
By Kelly Curran
In this document you'll review the micrometer adjustments.
Metric Micrometer Measurements Review
In this learning activity you'll review how to read a metric micrometer and use your knowledge to answer 12 questions.
Metric Micrometer
By scott vanhulle
The learner will measure and record dimensions using a metric micrometer to an accuracy of plus or minus .01 of a millimeter.
Material Condition Modifiers
By Janet Braun
Material condition modifiers may be applied to tolerances for geometric characteristics of features of size. A feature of size is one that can be measured across two opposing points, either internally or externally.
Marvel Saw: Interactive Programming - Manual Mode
By Dave Hoffman
In this simulation, learners follow a series of steps to operate the Marvel Saw PCII in the manual mode. This activity includes a video clip.
Marvel Saw: Interactive Programming - CNC
In this simulation, learners follow 10 steps to program a job to saw metal. This activity includes a video clip.
Marvel Saw: Clearing Out a Job
In this simulation, learners follow steps to clear out a job that had been previously created.
Machine Tool Turning
The learner will understand the basics of machine turning including how a lathe works, the equipment used, and commonly used terms.
Lockout / Tagout
In this learning activity you'll review the information and images on lockout and tagout procedures.
Layout Project: Drill & Tap Gage
In this learning object you'll review the steps to complete the layout of a part.
Layout Project : V-Block Clamps
In this learning activity you'll review a drawing and steps to complete an activity.
Layout Procedures
This document gives the procedures for layout on the surface of material.
Layout Project: Tool Bit Grinding Gage
This project gives the student a drawing and steps to complete an activity.
Lathes: Turning Stainless Steel
This document is a visual and text description of turning stainless steel on a lathe.
Lathes: Tapers & Radii
This document is a visual and text description of tapers and radii on a lathe.
Lathes: Groove & Thread Relieving
This document is a visual and text description of grooving and thread relieving on a lathe.
Lathes: Three Wire Method for Measuring Screws
This document is a visual and text description of the three-wire method for measuring screws for use with a lathe.
Lathes: Screw Thread Micrometer
This document is a visual and text description of using a screw thread micrometer with a lathe.
Lathes - Speed & Feed Setting
This document is a visual and text description of lathe speed and feed settings.
Lathes - Metric Thread Cutting
This document is a visual and text description of metric thread cutting on a lathe.
Lathe: Left-Hand Thread Cutting
This document is a visual and text description of left-hand thread cutting on a lathe.
Lathe Turning Machine Types
In this learning activity you'll explore Lathe Turning Machines.
Lathe Safety
In this document you'll review lathe safety rules.
Lathe Project: Turning with a Follower Rest
This project gives a drawing with steps to complete the activity.