Polymers (GCSE-A-Level)
solve the clues to get the answers
Created Date
04.15.20
Last Updated
04.16.20
Viewed 2 Times
Create multiple-choice games on Wisc-Online and play them on our Chakalaka mobile app!
But that's not all! Explore educational games created by others. Simply search by category or enter agame code number and dive into a world of learning and fun.
Download the Chakalaka mobile app here:
Topics of this game:
-
The source of synthetic plastics
-
Used for pipes and gutters
-
Added to plastics to increase flexibility
-
Added to plastics to change the colour
-
Can be heated and re-shaped over and over
-
Once mixed and formed the form can not be changed
-
the process of refining crude oil into plastics
-
Made from starch based materials such as corn
-
The process of converting large hydrocarbon into smaller more useful versions.
-
used to speed up the setting process for thermosetting plastics
-
polymers are made up of these simple compounds which are joined end to end to form long chains.
-
Added to plastics to make them resistant to heat and light.
-
stock form of plastic most commonly found in the workshop
-
most commonly used stock form when injection moulding
-
the process used when creating thin film such as plastic bags or cling film.
-
The full term for PLA used widely in 3D printers
-
polycaprolactone is the technical term for this 'modern material' that is mouldable at 62'c
-
this stockform is used a lot by plumbers and the building industry.
-
this thermosetting plastic is most commonly used as a glue and can be found under brand names such as Araldite.
-
used for small castings and arts and crafts, you can encapsulate objects inside it.
-
ususally white, it is brittle but has excellent heat and electrical insulation properties and is commonly used for electrical fittings.
-
common in the school workshop, it's technical name is shortened to PMMA.
-
this product is most often made from PET
-
flexible polymers
-
a natural elastomer that was first brought to Europe by Christopher Columbus
-
commonly used for wet suits for diving and surfing or protective casings for electronic devices
-
used widely in medical and food industries due to its flexibility, resistance of temperature extremes, electrical insulation and weather resistance
-
similar to rubber but tougher with better wear resistance and good thermal resistance against friction. Used for tyres and conveyor belts
-
a bio-plastic that can dissolve in water. Used in liquid detergents for washing machines.
-
a bio plastic made from starch and used for single use food items
-
the technical term for PHA, made from bacteria grown in cultures. Used in the medical industry for slow release medication patches and bone plates
-
A material comprised of two or more materials to improve their properties
-
colloquially termed fiberglass, glass fibres mixed with polyester resin results in this.
-
CFRP is the term used when this is mixed with polyester resin and often used in sports equipment for tough and strong but lightweight products.
-
used to cover low quality wood for kitchen worktops as it is hard, tough, heat resistant and food safe.
-
added to combat static charge build up in plastics
-
the process used to make hot tubs and bath shells
-
the process used to cast small items very quickly
-
the process used to create angles in sheets of plastic. Used in the workshop
-
A 2 part mould is used to trap plastic between it to form the desired shape.
-
the processes used when creating GRP items such as boat hulls
-
The process used to create hollow plastic forms
-
The process used to create seamless hollow objects such as traffic cones
-
the process by which a slug of plastic is squashed in a hydraulic press into a mould.
-
the part of an injection moulding machine where plastic granules are fed into
-
this processes is used to create a continuous flow of plastic pushed through a die to create a specific profile.
-
when blow moulding this is the heated plastic that has been extruded into a hollow tube.
-
one of the most accurate ways to cut plastic sheet
-
a finishing process that make the plastic feel fuzzy
-
colour images are printed onto water soluble film which floats on a tank of water while the product is submerged and the image wraps around it.
User comments are currently unavailable. We apologize for the inconvenience and are working to restore this feature as soon as possible.