Review - Radial Drill Press Parts Identification
By Kelly Curran
This interaction tests the student's knowledge of parts on a radial drill press.
Thread Cutting on a Drill Press
In this document you'll review thread cutting using a drill press.
Project Sheet: Radial Drilling Angle Plate Part 2a
This project gives a drawing with steps to complete the activity.
Multivibrators
By Terry Bartelt
In this animated object, learners examine three different types of multivibrators: astable, monostable, and bistable. A brief quiz completes the activity.
Shear - Hydraulic - Adira - Operator's Panel
By Dave Hoffman
Picture of Adira hydraulic shear's operator's panel with part identification and instructions on how to start and stop the shear as well as setting stroke (cutting length).
Calculating Feed Speeds for Twist Drills
Students read how to calculate feed rates for drills in inches per minute (IPM). The IPM formula is given and students work two practice problems.
Lathe Project: Process Planning - Tap Handle 2 (Casting Setup)
This project gives steps to complete the activity.
Lathe Project: Turning Using Steel Spring Collets
By Thaddeus Hetzer
This learning object contains work instructions and a drawing for turning using steel spring collets on a lathe.
The Universal NAND Gate
By Patrick Hoppe
Students view schematics and truth tables that demonstrate how the AND, OR, and Hex Inverter functions are achieved through the use of only NAND gates.
Programming Hurco Controller – Manual Mode
In this learning activity you'll review an explanation of how to operate the Hurco Controller in the manual mode.
Lathe - Tapers with Taper Attachment
This document is a visual and text description of using tapers with a taper attachment on a lathe.
Facing on a Lathe
This video clip shows facing on an engine lathe.
Project Sheet 1 PSR1#1 - File/Drill & Tap Gage
This lesson provides a drawing with steps to complete the activity.
Project Sheet - Darex Drill Grinding Machine
Development of a Boolean Expression for a Combinational Logic Circuit
Learners view an animated demonstration of how to determine the final output of the combinational circuit.
Lathes: Screw Thread Micrometer
This document is a visual and text description of using a screw thread micrometer with a lathe.
Radial Drilling Machines
In this document you'll review text and photos of the radial drilling machines.
Carbide Tool Geometry
The learner will use the ANSI Insert Identification System to identify and select carbide tools.
Lathe Project: Crank Handle Body
Lathe Construction - Review
This review tests the student's knowledge of lathe construction.
Programming the Hurco Controller - "CNC"
In this learning object you'll become familiar with the Hurco Controller in full CNC mode.
Quality Basics: The Pareto Chart
By Mary Lee Rudnick-Kaun
In this learning activity you'll calculate percentages, cumulative percentages, and answer questions related to sample Pareto charts.
Lathe Project: Tapers with Offset Tailstock - Lathe Center
This is a project that gives a drawing with steps to complete the activity.
Lathe: Left-Hand Thread Cutting
This document is a visual and text description of left-hand thread cutting on a lathe.
Feed Rate Calculations
This content gives the student a text and photo overview of feed rate calculations.