Students view the development of the transfer function for a RC high pass filter. They also read how a Bode plot is developed through simple approximation techniques for both the magnitude and phase.

In this learning activity you'll build a resistor's color code based on the bands.

Learners study the mathematical calculations used to determine the proper PID values to be entered into a controller using the Ziegler-Nichols Reaction Curve.

Learners view examples of waste in an office environment and are asked to consider what they can do to eliminate or reduce waste in their own workplace.

This activity is a simulation that allows the learner to practice personal protective equipment tasks.

In this simulation activity, an electrician will troubleshoot an AC motor that is overheating. Before accessing blueprints and then using a multimeter to find the fault, the learner will follow safety protocols by following lock-out tag-out procedures and then suit up with appropriate (PPE) personal protection equipment.

In this simulation activity, an electrician troubleshoots a defective compressor motor that will not start. To find the problem, the learner selects the appropriate blueprints that must be referred to while performing the troubleshooting steps. Then safety protocols will be followed, such as making lockout-tag out installations and donning PPE items before taking measurements with a multimeter to locate the faulty component.

In this simulation activity, an electrician troubleshoots a defective water pump that will not start. To find the problem, the learner selects the appropriate blueprints that must be referred to while performing the troubleshooting steps. Then safety protocols will be followed, such as making lockout-tag out installations and donning PPE items before taking measurements with a multimeter to locate the faulty component.

In this interactive object, learners examine the neuron pathway into and out of the spinal cord. They complete the activity by testing their knowledge of vocabulary and the location of spinal cord structures.

You will have to find the cards that correspond to the same pair

Try matching the 8 steps of the Engineering Design Process. After you finish....try to beat your score!

Overall Review

Engineering Bridge Game