Saw - Marvel - PCII - Clearing a Job
By Dave Hoffman
The student learns how to delete a job after it is programmed in the Marvel PCII.
Power Roller - Part Identification
In this learning activity you'll review the parts of a three-roll power roller and practice identifying them.
Lathe Project: Draw Tube (Internal Thread Cutting)
By Kelly Curran
This project gives a drawing with steps to complete the activity.
Lathe Project: Tapers & Radii - Index Pin
Print Reading: Slotted Block
In this learning activity you'll illustrate your ability to visualize a slotted block.
Calculating Force for Punching
Users calculate the tonnage required to punch holes in a specific base metal. The formula to be used is provided along with the tensile strength for various metals. A calculator is required.
Lathe Project: Thread Diameter Turning
Layout Project: Drill & Tap Gage
In this learning object you'll review the steps to complete the layout of a part.
Project Sheet - Web Thinning
Top Bender - Interactive Operator's Control Panel
In this interactive object, learners follow steps to program and operate the Ercolina Top Bender.
Lathe Project: Straight Diameters - Gear Spindle
Norton Tool and Cutter Grinder Construction
In this learning activity you'll explore a Tool and Cutter Grinding machine and its components.
Lathes: Three Wire Method for Measuring Screws
This document is a visual and text description of the three-wire method for measuring screws for use with a lathe.
The Edge-finder
By Mike Cattelino
Students read about the edge-finder's parts and assembly, and view video clips of the tool in action.
Shear - Hydraulic - Adira - Setting Back Gauge
Step-by-step of setting the back gauge with an Adira Hydraulic Shear.
Squaring a Part
By Erich Krowas
This video will guide you through the process of squaring a part on a milling machine.
Machine Tool Turning
The learner will understand the basics of machine turning including how a lathe works, the equipment used, and commonly used terms.
Pipe/Tubing Bender - Parts Identification
The student reads about the parts of a pipe/tubing bender and later identifies them in an interactive review.
Chordal Distances
By Barbara Anderegg
Students review how to use chordal distances to locate bolt hole circle locations. They then take a 10-question quiz to test their knowledge.
Lathe Project: Lathe Operations - Grinding a Tool
Top Bender - Operator's Control Panel
Learners are asked to program the Top Bender following the same steps they would if working on the actual control panel.
Overview of the Bridgeport Milling Machine
In this video, we’ll identify the parts that make up the Bridgeport and learn how it works.
Lathe Safety
In this document you'll review lathe safety rules.
Preparing Thread Cutting Tools
This document is a visual and text description of preparing thread cutting tools, primarily used on a lathe.
Calculating Turning Speeds & Feeds
This document is a visual and text description of Calculating Turning Speeds & Feeds on a lathe.