Cutting Speeds & RPM Calculations
By Kelly Curran
In this document you'll review an overview of cutting speeds and RPM calculations.
Lathe Project: Draw Tube
This project gives a drawing with steps to complete the activity.
Lathe Project: Turning Between Centers
By Thaddeus Hetzer
Learners read work instructions and view a drawing for turning between centers on a lathe.
Project Sheet - Drill & Tap Gage
This lesson provides a drawing with steps to complete the activity.
Saw - Marvel - PCII - Programming a Job (Full CNC)
By Dave Hoffman
The student views step-by-step instructions for programming a "job" with the PCII on the Marvel vertical band saw.
Reading a Micrometer
By Sue Silverstein
In this learning activity you'll practice reading an inch micrometer.
Lathe Project: Facing and Center Drilling
The learner reads step-by-step work instructions and views a drawing for facing and center drilling on a lathe.
GD&T: Geometric Characteristic Symbols
By Glenn Sokolowski
In this interactive object, learners test their knowledge of 14 geometric tolerance control symbols.
Sterling Drill Grinder
In this document you'll review the Sterling Drill Grinder.
Operating the Adira Hydraulic Shear
In this interactive object, learners set up a shear, enter the back gauge dimension, and prepare to shear metal in a simulation of the Adira Hydraulic Shear.
Spark Testing of Materials
The learner sees photos of the spark patterns of various materials and their related properties.
Gear Nomenclature (Screencast)
By James Bourassa
In this interactive object, learners view various components of gears and read descriptions of them. Learners then identify the location of each of these components in a drag-and-drop exercise.
Inside Measurement
In this learning activity you'll review a visual overview of inside measurement.
Project Sheet - Indicator Rod
General Shop Safety - Rigging & Lifting
In this learning activity you'll review rigging and lifting as well as signals for crane movement.
Indirect Measurement
In this learning activity you'll review a visual overview of indirect measurement.
Lathe - Cutting Tool Shapes
This document is a visual and text description of lathe cutting tool shapes.
General Safety - Ears and Face
In this learning activity you'll review the safety equipment used to protect a worker's face and ears.
Layout Procedures
This document gives the procedures for layout on the surface of material.
HURCO Controller – Interactive Programming - Manual
Learners are asked to control the Adira press brake following the same steps they would if working on the actual machine.
Lathe Project: Tapers with a Taper Attachment - Gear Spindle
Lathe Project: Turning with a Follower Rest
Project Sheet - Sawing 2
This project gives a drawing and steps to complete the activity.
Project Sheet: Angle Plate Part 2
Lathes - Speed & Feed Setting
This document is a visual and text description of lathe speed and feed settings.