GTAW Setup Guide
Print Reading: Three-Step Block
By Jessie Lloyd
2D and 3D views used to help convey information from a drafter or designer to the welder are provided. This activity will focus on a three-step block. A short quiz to test your ability to correctly read this information follows.
The Strain Wave Gear Principle
The learner will understand the inner workings of the strain wave gear principle.
Introduction to 5S Practices in the Workplace
Let's explore what 5S is and how we use it in the welding workshop.
Fillet Weld Acid Etch Test
GTAW Electrode Characteristics
In this learning module you'll become familiar with different types of GTAW electrodes.
Appropriate Use of Welding Coupons
This module will guide you thru the use of welding coupons in the welding process.
FCAW Setup Guide
TIG Electrode Matching
The Groove Weld Bend Test
SMAW Electrode Flux Covering Types
In this learning activity you'll practice identifying the correct flux covering for the SMAW electrode.
SMAW Polarity Identification
In this learning activity you'll use the last number in the electrode identification to choose the correct polarity.
Weld Joint Configurations 1
You'll identify common weld joints and their possible configurations.
Creative Commons Attribution-NonCommercial 4.0 International License.
Learn more about the license »