In this interactive and animated object, learners examine orthographic projection and the Glass Box Theory. Front, side, and top view development is demonstrated with pictorial views of each object to help develop 2D to 3D visualization skills.

In this learning object, you’ll explore what tools should be a part of every welding tool bag.

Students view a video that shows the correct methods for starting a GTAW weld pool and adding filler. It focuses on the two problems that many students have – adding filler too soon and angling the torch so that the filler melts prematurely on the filler rod. Note: This activity is 3.6 mb.

The learner will identify the steps and proper techniques for installing a wire spool on a welding machine.

The learner will gain an understanding of robot motion control by comprehending the fundamentals of the encoder.

The learner will gain an understanding of the inner workings of the cycloidal gear drive while watching a video and listening to an explanation of its features.

The learner will learn the programming steps that are used to create circular motions with robots.

In this interactive object, learners read an explanation of the electrodes used for welding with the GMAW and FCAW processes. In two matching exercises, students test their knowledge of classification and specification numbers.

Learners view wire feed power sources ranging from 110-volt, single phase units to 460-volt, three-phase units. A description and photos of each are provided.

In this interactive object, learners examine sectional views used in engineering drawings. The sections shown are full, half, offset, aligned, revolved, and broken-out. Learners match drawings of sectional views with the names of the views.

The learner will identify components of a welding robot and determine if the robot is set up correctly to avoid singularity.

The learner will identify the types of motion instructions used for programming a robot.

The learner will understand the inner workings of the strain wave gear principle.

The learner will be able to read and interpret thread notes from a print.

In this activity you'll identify several hazards in a welding environment.

In this learning activity, you’ll explore the characteristics of common, carbon steel shielded metal arc welding electrodes, which fall under American Welding Society specification A5.1.

In this animated and interactive object, learners follow steps that begin with choosing the correct drive roll and include feeding the electrode wire from the spool to the welding gun.

The learner will view videos showing the movements of each axis of the six-axis robot.

The learner will understand the design of a planetary gear drive and its advantages and disadvantages.

The learner will understand proper safe handling and installation procedures for shielding gas cylinders.

The learner will understand and be able to apply the common welding variables of the GMAW process.

In this learning activity you'll recognize potential safety hazards around grinding equipment

In this interactive object, the learner reads an explanation of how various shielding gases are used in GMAW and FCAW. An exercise completes the activity.

The learner will identify the advantages and disadvantages of the four modes of GMAW transfer.

In this interactive object, learners follow steps to assemble a wire feed welding torch or gun.