Warning! This learning object uses Adobe Flash and your browser does not support Flash. To view this content you will either need to install and/or enable flash in your web browser or upgrade your web browser.
Click Here for instructions to enable Flash.
This project gives steps to complete the activity.
General Shop Safety - Hazardous Materials Safety
By Kelly Curran
In this learning activity you'll review the hazardous materials safety document which display an example of a MSDS (Material Safety Data Sheet).
Programming the Hurco Controller - "CNC"
By Dave Hoffman
In this learning object you'll become familiar with the Hurco Controller in full CNC mode.
Tracing Logic Circuit Signals
By Terry Bartelt
Learners follow steps to trace logic signals from the inputs of several interconnecting logic gates to one output.
By scott vanhulle
The learner will measure and record dimensions using a metric micrometer to an accuracy of plus or minus .01 of a millimeter.
Ammco Brake Lathe Controls
By Bill Heesaker
In this animated activity, learners examine the various controls that operate an Ammco brake lathe.
This document gives an overview of chuck maintenance.
Lathe - Cutting Tool Shapes
This document is a visual and text description of lathe cutting tool shapes.
Lathe Cutting Speeds - RPM Calculations
This document is a visual and text description of lathe cutting speeds and RPM calculations.
The Engine Lathe
This document is a visual and text description of the engine lathe.
Creative Commons Attribution-NonCommercial 4.0 International License.
Learn more about the license »