In this simulation activity, an electrician troubleshoots a defective compressor motor that will not start. To find the problem, the learner selects the appropriate blueprints that must be referred to while performing the troubleshooting steps. Then safety protocols will be followed, such as making lockout-tag out installations and donning PPE items before taking measurements with a multimeter to locate the faulty component.

In this learning activity you'll describe customer requirements and specifications as they relate to "Quality" in an organization.

This project gives a drawing with steps to complete the activity.

The learner will gain an understanding of robot motion control by comprehending the fundamentals of the encoder.

In this video, you’ll learn how to make changes to an engine lathe.

In this video, we’ll go over the necessary steps to square the toolhead on a Bridgeport mill.

In this video, you’ll learn how to set up a long piece of tubing using a steady rest, so that you can bore the ends for a bearing.

This video will show you how to setup and cut a taper using a taper attachment.

In this video, you’ll explore how to use a vise on a Bridgeport mill to securely hold your workpiece.

You'll practice identifying relief angles and rake angles related to lathe cutting tools.

The learner will identify tools and practices associated with setting up a lathe to turn between centers.