In this video, you’ll learn how to make changes to an engine lathe.
Cutting Tapers using the Taper Attachment
By Kelly Curran
This video will show you how to setup and cut a taper using a taper attachment.
Lathe Project: Tapers with Offset Tailstock - Lathe Center
This is a project that gives a drawing with steps to complete the activity.
Radial Drilling Machines
In this document you'll review text and photos of the radial drilling machines.
Equivalent Gates/Ladder Logic Circuits
By Terry Bartelt, Terry Fleischman
Learners will identify ladder logic diagrams and the logic functions they perform.
Engine Lathe: Basic Components and Operation
In this video, you’ll explore the engine lathe, its basic components, and you’ll learn to operate its machine controls.
Squaring the Toolhead
By Erich Krowas
In this video, we’ll go over the necessary steps to square the toolhead on a Bridgeport mill.
Using a Steady Rest
In this video, you’ll learn how to set up a long piece of tubing using a steady rest, so that you can bore the ends for a bearing.
Mounting and Indicating a Vise
In this video, you’ll explore how to use a vise on a Bridgeport mill to securely hold your workpiece.
Cutting Tool Geometry
You'll practice identifying relief angles and rake angles related to lathe cutting tools.
Turning Between Centers
The learner will identify tools and practices associated with setting up a lathe to turn between centers.
Creative Commons Attribution-NonCommercial 4.0 International License.
Learn more about the license »
Give your new group a name.