Lathes: Tapers & Radii
By Kelly Curran
This document is a visual and text description of tapers and radii on a lathe.
Review - Radial Drill Press Parts Identification
This interaction tests the student's knowledge of parts on a radial drill press.
Thread Cutting on a Drill Press
In this document you'll review thread cutting using a drill press.
Project Sheet: Radial Drilling Angle Plate Part 2a
This project gives a drawing with steps to complete the activity.
Lathe Project: Process Planning - Tap Handle 2 (Casting Setup)
This project gives steps to complete the activity.
Lathe Project: Turning Using Steel Spring Collets
By Thaddeus Hetzer
This learning object contains work instructions and a drawing for turning using steel spring collets on a lathe.
Orthographic Projection #1
By Glenn Sokolowski
In this interactive and animated object, learners examine orthographic projection and the Glass Box Theory. Front, side, and top view development is demonstrated with pictorial views of each object to help develop 2D to 3D visualization skills.
Lathe - Tapers with Taper Attachment
This document is a visual and text description of using tapers with a taper attachment on a lathe.
Facing on a Lathe
This video clip shows facing on an engine lathe.
Project Sheet 1 PSR1#1 - File/Drill & Tap Gage
This lesson provides a drawing with steps to complete the activity.
Project Sheet - Darex Drill Grinding Machine
Lathes: Screw Thread Micrometer
This document is a visual and text description of using a screw thread micrometer with a lathe.
Radial Drilling Machines
In this document you'll review text and photos of the radial drilling machines.
Carbide Tool Geometry
The learner will use the ANSI Insert Identification System to identify and select carbide tools.
Lathe Project: Crank Handle Body
Lathe Construction - Review
This review tests the student's knowledge of lathe construction.
Lathe Project: Tapers with Offset Tailstock - Lathe Center
This is a project that gives a drawing with steps to complete the activity.
Lathe: Left-Hand Thread Cutting
This document is a visual and text description of left-hand thread cutting on a lathe.
Feed Rate Calculations
This content gives the student a text and photo overview of feed rate calculations.
Cutting Speeds & RPM Calculations
In this document you'll review an overview of cutting speeds and RPM calculations.
Lathe Project: Draw Tube
Lathe Project: Turning Between Centers
Learners read work instructions and view a drawing for turning between centers on a lathe.
Project Sheet - Drill & Tap Gage
Reading a Micrometer
By Sue Silverstein
In this learning activity you'll practice reading an inch micrometer.
Lathe Project: Facing and Center Drilling
The learner reads step-by-step work instructions and views a drawing for facing and center drilling on a lathe.