REVIEW: Work Holding
By Kelly Curran
The student reviews milling machine work-holding devices.
Sawing Review
In this interaction the student is asked 19 questions related to sawing machines.
An Introduction to Wittman Regional Airport
By Jared Huss, Paul Roth
This animated guide presents an FAA map and aerial photos showing various areas of interest to student pilots enrolled in flight training at FVTC Aviation at Wittman Regional Airport in Oshkosh, WI. The airport is the site of the annual Experimental Aircraft Association's AirVenture Oshkosh. This object has sound.
Electrical Units, Abbreviations, and Symbols
By Patrick Hoppe
In this learning activity you'll read introduction to electrical quantities, units, and symbols and test their knowledge in a matching exercise.
Making the Workplace Talk to You: Using Visual Controls
By Kaye Krueger
Learners examine how visual controls help to manage the workplace. Photos of visual controls are provided.
Tilting the Head on a Manual Mill
This video will demonstrate the process or tilting the head on a Bridgeport manual milling machine.
Cutting Tapers on an Engine Lathe using the Taper Attachment
By Erich Krowas
This video will demonstrate how to cut tapers on an engine lathe using the taper attachment.
Shop Safety Review Sheet
The student takes a 14-question quiz of shop safety.
Tolerances
By Jessie Jelinski
Project Sheet: Radial Drill Manifold
This project gives a drawing with steps to complete the activity.
Haas Milling Machine - Setting Offsets
Learn how to set offsets on the Haas CNC Machining Center.
Lathe Operations -- Threading on a Lathe: Review
The student takes a quiz concerning lathe operations in chucks.
Fixed Gages Review
This interaction tests the student's knowledge of fixed gages.
Lathe Operations in Chucks: Review
This review tests the student's knowledge of lathe operations in chucks.
Tap and Dies Review
This review assesses the student's ability to use taps and dies.
Sequencer Output Instruction for the SLC-500 PLC
By Craig Hemken
Learners examine the fundamental concepts of sequencer output instruction. A simulated example shows a sequencer in operation.
Power Tapping on a Bridgeport Milling Machine
This video will demonstrate power tapping on a Bridgeport milling machine.
Measuring a Hole Diameter Using Small Hole Gages
By Jeff Theys
This video shows how to measure a hole diameter of a part using small hole gages.
Hacksaws Identification Review
This review assesses the student's ability to identify a hacksaw correctly.
Haas CNC Vertical Machining Center Operations
Operational overview of the Haas CNC vertical machining center.
How Material Condition Modifiers Affect Geometric Tolerances
By Janet Braun
This activity will review determining geometric tolerances for a part.
Adjustable Parallels
This video will demonstrate using adjustable parallels to measure a part.
Jig Mill Operations
Overview of Jig Mill Operations.
Calculating Speeds and Feeds for Milling Machines
By Jim Kitchen
This video will walk through how to calculate speeds and feeds for drilling parts on a milling machine.
Proportional Control Amplifier
By Terry Bartelt
Learners examine the operation of a proportional control amplifier and the two ways that it is programmed using proportional gain or proportional band. A brief quiz completes the activity.