In this simulation activity, an electrician troubleshoots a defective water pump that will not start. To find the problem, the learner selects the appropriate blueprints that must be referred to while performing the troubleshooting steps. Then safety protocols will be followed, such as making lockout-tag out installations and donning PPE items before taking measurements with a multimeter to locate the faulty component.

In this interactive learning object, the learner practices sizing a tank-type water heater for one- and two-family residences, townhouses, and apartments with individual water heaters.

Explore the step-by-step procedures to rescue and care for electrical shock victims.

In this animated object, learners examine how hydraulic jump affects drain flow and pneumatic pressures in the drain system.

This activity is a simulation that allows the learner to practice personal protective equipment tasks.

In this simulation activity, an electrician will troubleshoot an AC motor that is overheating. Before accessing blueprints and then using a multimeter to find the fault, the learner will follow safety protocols by following lock-out tag-out procedures and then suit up with appropriate (PPE) personal protection equipment.

In this simulation activity, an electrician troubleshoots a defective compressor motor that will not start. To find the problem, the learner selects the appropriate blueprints that must be referred to while performing the troubleshooting steps. Then safety protocols will be followed, such as making lockout-tag out installations and donning PPE items before taking measurements with a multimeter to locate the faulty component.

In this simulation activity, an electrician troubleshoots a defective water pump that will not start. To find the problem, the learner selects the appropriate blueprints that must be referred to while performing the troubleshooting steps. Then safety protocols will be followed, such as making lockout-tag out installations and donning PPE items before taking measurements with a multimeter to locate the faulty component.

Match each clue to the PPE it describes in 3 minutes. The first three persons to match all PPE correctly will be awarded.

Answer the questions quickly and correctly.

Test your Health & Safety knowledge with this quiz.

Donning PPE in correct sequence