The MOD 10 Counter
The technique for designing a MOD 10 counter is introduced. Asynchronous inputs of a JK flip-flop are used to clear the counter.
You may also like
Ask a Question
Comments
Asked by
Zaleh
on 12/23/2014 5:55:12 AM
Votes 0.00
Thumps Up
Thumps Down
How would I Design a FSM Controller to drive the two signals ld_en and CLR . The
Controller should have a single input clr/shift and operate as follows: When clr/shift = 1 both Shift Registers are loaded via their Parallel Inputs.
When clr/shift = 0 each rising clock shifts the value in both SR.
Creative Commons Attribution-NonCommercial 4.0 International License.