Files Identification Review
By Kelly Curran
This review assesses the student's ability to use a file.
Tool and Cutter Grinder Construction Review
This review assesses the student's knowledge of the tool and cutter grinder and of the tool and cutter grinding process.
Vernier Identification Review
In this interaction the student is presented with 12 questions on vernier caliper parts identification.
8D Problem Solving Process
In this learning module, you will learn about the 8D process.
Lathe Operations -- Threading on a Lathe: Review
The student takes a quiz concerning lathe operations in chucks.
Lathe Operations in Chucks: Review
This review tests the student's knowledge of lathe operations in chucks.
REVIEW: Work Holding
The student reviews milling machine work-holding devices.
Rigging & Lifting Safety
This content module will review rigging and lifting techniques and equipment.
Project Sheet: Radial Drill Manifold
This project gives a drawing with steps to complete the activity.
Fixed Gages Review
This interaction tests the student's knowledge of fixed gages.
Sawing Review
In this interaction the student is asked 19 questions related to sawing machines.
Tap and Dies Review
This review assesses the student's ability to use taps and dies.
Hacksaws Identification Review
This review assesses the student's ability to identify a hacksaw correctly.
Electrical Units, Abbreviations, and Symbols
By Patrick Hoppe
In this learning activity you'll read introduction to electrical quantities, units, and symbols and test their knowledge in a matching exercise.
Making the Workplace Talk to You: Using Visual Controls
By Kaye Krueger
Learners examine how visual controls help to manage the workplace. Photos of visual controls are provided.
Pedestal Grinder Review
This review assesses the student's ability to use a Pedestal Grinder.
Sine Wave Fundamentals
Learners examine the characteristics of a sine wave and the various ways to describe it including Vp, Vp-p, Vrms, Vavg, and frequency.
Sequencer Output Instruction for the SLC-500 PLC
By Craig Hemken
Learners examine the fundamental concepts of sequencer output instruction. A simulated example shows a sequencer in operation.
Proportional Control Amplifier
By Terry Bartelt
Learners examine the operation of a proportional control amplifier and the two ways that it is programmed using proportional gain or proportional band. A brief quiz completes the activity.
Up/Down-Counter Application
In this animated object, learners examine how PLC up/down-counters are used to control an automated parking lot gate.
Part Alignment on the Coordinate Measurement Machine
By John Stewart
In this animated object, learners examine how to align a part on the 1808 CMM.