The learner will gain an understanding of robot motion control by comprehending the fundamentals of the encoder.

This project gives a drawing with steps to complete the activity.

Learners identify negative roles, match statements characteristic of each role, and relate how they have handled negative teams.

In this interaction the student is asked 19 questions related to sawing machines.

In this simulation activity, an electrician will troubleshoot an AC motor that is overheating. Before accessing blueprints and then using a multimeter to find the fault, the learner will follow safety protocols by following lock-out tag-out procedures and then suit up with appropriate (PPE) personal protection equipment.

In this simulation activity, an electrician troubleshoots a defective compressor motor that will not start. To find the problem, the learner selects the appropriate blueprints that must be referred to while performing the troubleshooting steps. Then safety protocols will be followed, such as making lockout-tag out installations and donning PPE items before taking measurements with a multimeter to locate the faulty component.

In this simulation activity, an electrician troubleshoots a defective water pump that will not start. To find the problem, the learner selects the appropriate blueprints that must be referred to while performing the troubleshooting steps. Then safety protocols will be followed, such as making lockout-tag out installations and donning PPE items before taking measurements with a multimeter to locate the faulty component.

Students listen to three telephone messages and enter their evaluation of each one. They then read a list of guidelines for leaving effective messages.

In this learning activity you'll identify the various parts of a bar graph, read and interpret its data, and calculate the data to solve various application problems.

math terms and Definitions

Reading Selection: President of the Whole Fifth Grade. A book by Sherri Winston

I hope you enjoy

To differentiate between line, line segment, and ray