In this learning activity you'll review the various ways to calculate the total power consumed in a series circuit.

Learners study animated rheostat settings that show how varying the current flow affects the amount of power that is dissipated in a series circuit. Nine review questions complete the activity.

This project gives a drawing and steps to complete the activity.

Learners observe how an optical pyrometer is used to take temperature measurements without making physical contact with the object being measured.

In this simulation activity, an electrician will troubleshoot an AC motor that is overheating. Before accessing blueprints and then using a multimeter to find the fault, the learner will follow safety protocols by following lock-out tag-out procedures and then suit up with appropriate (PPE) personal protection equipment.

In this simulation activity, an electrician troubleshoots a defective compressor motor that will not start. To find the problem, the learner selects the appropriate blueprints that must be referred to while performing the troubleshooting steps. Then safety protocols will be followed, such as making lockout-tag out installations and donning PPE items before taking measurements with a multimeter to locate the faulty component.

In this simulation activity, an electrician troubleshoots a defective water pump that will not start. To find the problem, the learner selects the appropriate blueprints that must be referred to while performing the troubleshooting steps. Then safety protocols will be followed, such as making lockout-tag out installations and donning PPE items before taking measurements with a multimeter to locate the faulty component.

In this learning activity you'll create a packet filter.

In this learning activity you'll examine how a large computer network is configured.

This game will challenge your knowledge of different computer ports.

Defining Stories for Children

vocabulary from "Recipe for Reading"

By Lily Morrow