In this animated object, learners examine the operation of a robot using the integral control mode to overcome a steady state.

In this learning activity you'll review angles and different types of angular measuring tools associated with manufacturing.

This document is a visual and text description of grooving and thread relieving on a lathe.

Learners examine how a PLC Timer-Off instruction is used in the operation of an automotive paint booth.

In this simulation activity, an electrician will troubleshoot an AC motor that is overheating. Before accessing blueprints and then using a multimeter to find the fault, the learner will follow safety protocols by following lock-out tag-out procedures and then suit up with appropriate (PPE) personal protection equipment.

In this simulation activity, an electrician troubleshoots a defective compressor motor that will not start. To find the problem, the learner selects the appropriate blueprints that must be referred to while performing the troubleshooting steps. Then safety protocols will be followed, such as making lockout-tag out installations and donning PPE items before taking measurements with a multimeter to locate the faulty component.

In this simulation activity, an electrician troubleshoots a defective water pump that will not start. To find the problem, the learner selects the appropriate blueprints that must be referred to while performing the troubleshooting steps. Then safety protocols will be followed, such as making lockout-tag out installations and donning PPE items before taking measurements with a multimeter to locate the faulty component.

In this learning activity you'll create a packet filter.

In this learning activity you'll examine how a large computer network is configured.

Storage Devices

Engineering stuff.

Tech terms and stuff

In this game, you must try to remember the cards and choose the matches! Good luck!